Design and Check Certificates
Contents |
[edit] Introduction
Design and check certificates are documents submitted by developers and designers of highway structures in England, Wales and Northern Ireland. These documents are referred to as structure design certificates in Scotland. Design and check certificates are not to be confused with scaffold design checks required under BS 5975:2008, the British Standard that covers scaffolding and defines the requirements of each checking category.
[edit] History
The introduction of design and check certificates came about in the 1970s after a number of structural failures occurred in bridges around the world. From that point on, the UK Government required nearly all road-related structures to pass an independent technical approval (TA) certification process prior to construction.
[edit] Procedures
TA is required for all proposed structures within the road boundary (6m of a road) or that support a public road. The type of approval is dependent on the complexity of the project.
There are four categories for proposals - 0, 1, 2, 3. Category 0 is the least significant (for simple things such as roadside masts) and Category 3 is the most complex (for large projects such as bridge structures).
Different categories require different procedures for design and check certificates.
Category 0 and 1 structures require a combined design and check certificate. (Note that Category 0 certificates include the Technical Approval Authority [TAA] reference number and the date of agreement of the approval in principle.)
Category 2 and 3 structures require separate design and check certificates.
Upon completion of the project, the design and check certificates are signed to declare satisfactory completion of work. They are then sent to the TAA through the appropriate Roads and Service Divisional Office.
[edit] Related articles on Designing Buildings Wiki
- Bridge construction.
- Highways.
- Manual of Contract Documents for Highway Works.
- Overview of the road development process.
- Road construction.
- Temporary works for construction.
[edit] External resources
Featured articles and news
HSE simplified advice for installers of stone worktops
After company fined for repeatedly failing to protect workers.
Co-located with 10th year of UK Construction Week.
How orchards can influence planning and development.
Time for knapping, no time for napping
Decorative split stone square patterns in facades.
A practical guide to the use of flint in design and architecture.
Designing for neurodiversity: driving change for the better
Accessible inclusive design translated into reality.
RIBA detailed response to Grenfell Inquiry Phase 2 report
Briefing notes following its initial 4 September response.
Approved Document B: Fire Safety from March
Current and future changes with historical documentation.
A New Year, a new look for BSRIA
As phase 1 of the BSRIA Living Laboratory is completed.
A must-attend event for the architecture industry.
Caroline Gumble to step down as CIOB CEO in 2025
After transformative tenure take on a leadership role within the engineering sector.
RIDDOR and the provisional statistics for 2023 / 2024
Work related deaths; over 50 percent from construction and 50 percent recorded as fall from height.
Solar PV company fined for health and safety failure
Work at height not properly planned and failure to take suitable steps to prevent a fall.
The term value when assessing the viability of developments
Consultation on the compulsory purchase process, compensation reforms and potential removal of hope value.
Trees are part of the history of how places have developed.